Rolls-Royce Replacement Tires in black or whitewall

When we designed our replacement tires for the Pocher Rolls-Royce, we were determined to create a tire with four key improvements over the Pocher-supplied tires; flexibility for ease of installation, a "real-rubber" matte finish, removal of the unsightly bulge in the sidewall and - most importantly - a perfect fit on the Pocher metal rims.

We are thrilled that our new Rolls-Royce tires feature all of the above. No more scratching or damaging your painted rims while installing the tire. No more heating to soften them. No more tires that are shinier than the paint job on the car. No more painting the sidewalls with white paint that cracks and chips. Our new tires are a great upgrade for any Pocher Rolls-Royce enthusiast.

Try this with a Pocher tire!	Our Tire is the one on the left...

Black Tire Part No. R035 $30.00 each

Whitewall Tire Part No. R035w $40.00 each

They're Back! Our Original Rolls-Royce i.d. Plates

(actual size is smaller)

These are photo-etched with a metal backing and adhesive for easy placement. Legible with a magnifying glass!

And, to add even more realisim...we are including (30) 1.0 mm brass rivets.

Some close ups...

The i.d. Plates on a model

Part No.R015 $25.00 per set

The Complete Rolls-Royce Headlight Set

We have been working for over two years to develop the metal Reflectors and glass Lenses. They both used advanced technologies. The master for the Reflector utilized "rapid prototyping" and the pattern on the Lenses is printed by a process know as "tampography".

To create the Reflector, a 3D CAD design was drawn by Brian Yingling (thanks again, Brian!). Then, it was sent to a company to "print" in 3D (rapid prototyping)...the result is the acrylic master shown below. The master is then sent to the caster where a mold is made. After casting in bronze, it is then highly polished ready for chrome plating. Of course, it took several castings to achieve the perfect fit!

acrylic master	cast in bronze, highly polished and chrome plated

The Lenses are hand cut, beveled, and polished from watch grade 1 mm German tempered glass. Then the pattern is printed by a process called "tampography", also called "pad printing". The image is etched into a metal plate, then the ink is deposited into the image; the excess wiped away. Then a rubber pad is pressed against the plate to pick up the image. The pad is then pressed against the glass. Complicated and expensive, but the results are worth it!

The Rolls-Royce Headlight Set will include our well known Headlight Housings and Diffusers, the metal chrome plated Reflectors, glass Lenses (either clear, as were many PII's, or with the pattern), bulbs, grommets, heat shrink tubing and wire.

Because so many already have our Headlight Housing, we are offering the Reflectors and Lenses separately.

For detailed Instructions how to install ...click here

The Complete Rolls-Royce Headlight Set (pattern Lense) - Part No.R004a $110.00 per set

The Complete Rolls-Royce Headlight Set (clear Lense) - Part No.R004b $100.00 per set

Reflectors - Part No.R004f $25.00 per pair

Pattern Lenses - Part No.R004l $30.00 per pair

Clear Lenses - Part No.R004lc $20.00 per pair

A beautiful set of Rolls-Royce Seats

made by Jerry Moore

Jerry said... "It's relatively easy when using Model Motorcars's Resin Seats, Leather and Piping"

Thanks, Jerry!

The Rolls-Royce Leaf Springs A combination of stainless steel leaf springs and cast bronze clamps…that actually work! After the gratifying success of our Alfa Leaf Springs, it was obvious to make them for the Rolls. And, for those who have built a Rolls, you know how awful the Pocher one’s are! We have even used compression springs in the rear of our models to hold them up. Well, no more! Once again, our thanks to Brian Yingling for his drawings that make the photo-etching possible. And, to the Rolls-Royce Enthusiasts Club for providing copies of the original factory plans. The Kit comes with the main leafs preformed at the ends and 00-90 nuts for the clamps. For those determined to achieve prototypical accuracy…we include shrink tubing which we discovered works wonderfully to replicate the gaiters. Click here for Instructions Part No.R001 $215.00 complete Kit

Front Back Plate Brake Levers

	More replacements for Pocher stamped metal! These are prototypical (original blueprint from Rolls-Royce), cast in bronze and tapped for 00-90 bolts (provided). The photo above shows the comparison of our parts with Pocher...including the MML Axle and Steering Lever... Part No R020 $40.00 per pair

Click picture for more information	Rolls-Royce Item Description	Item Price	Click to buy
	Rolls Replacement Tire - R035 Flexible, matte finish...easily fits on the wheel.	$30 each
	Rolls Replacement Tire - Whitewall - R035w Flexible, matte finish...easily fits on the wheel. No more painting!	$40 each
	Rolls Headlight Set - R004a Includes the Rolls Headlights, Reflectors, pattern Lenses, bulbs, grommets, heat shrink tubing and wire. Click here for Instructions.	$110 per set
	Rolls Headlight Set - R004b Includes the Rolls Headlights, Reflectors, clear Lenses, bulbs, grommets, heat shrink tubing and wire. Click here for Instructions.	$100 per set
	Rolls Headlights - R004 Chrome plated, cast bronze — correct shape, size and top piece — includes three prong diffuser	$65 per pair
	Rolls Headlight Reflectors - R004f Cast bronze, highly polished and chrome plated, only fits the MML Headlight housing.	$25 per pair
	Rolls Headlight Lenses - Pattern - R004l Made from watch grade 1.0 mm German Glass, beveled and printed pattern.	$30 per pair
	Rolls Headlight Lenses - Clear - R004lc Made from watch grade 1.0 mm German Glass and beveled.	$20 per pair
	Rolls Tail Light Housing - R031 Based on the Lucas prototype...uses the Pocher lenses. Bronze castings, nickel plated. Includes 00.90 Nuts and Bolts	$15 per pair
	Rolls Lever Switches - R033 Direct replacement of the Pocher levers. Bronze castings, nickel plated.	$12 set of 3
	Rolls Medallion - R032 Direct replacement, prototypically correct, photo-etched in .40 stainless steel.	$5 each
	Rolls Leaf Springs - R001 Direct replacement, stainless steel, cast bronze clamps, shrink tubing, includes 00-90 bolts. Click here for Instructions	$215.00 complete Kit
	Rolls Front Back Plate Brake Levers - R020 Direct replacement, cast in bronze, includes 00-90 bolts Click here for Instructions	$40 per pair
	Rolls Servo Connectors - R029 Direct replacement, cast in bronze...requires some modifications. We will provide photos and instructions. Click here for Instructions	$65 per trans kit
	Rolls Steering Arm - R030 Direct replacement, cast in bronze...requires extensive modifications. We will provide photos and instructions. Click here for Instructions	$10 each
	Rolls Steering Levers - R007 Direct replacement, cast in bronze	$25 for both
	Valve Stems - Z043 Direct replacement to the Pocher provided valve stems, cast in bronze.	$10 set of 6
	Ignition Wire - Z038 Correct 1930's style ignition wire, proper scale gauge. Click here for Instructions	$5.00 for 3 feet
	Boots - Z039 Replaces the Pocher rivets! Cast in resin, fits our new ignition wire. Click here for Instructions	$5 for set of 10
	Rolls-Royce Chassis Stands - Z027 Made from aircraft aluminum with a sanded finish - stands swing free so that the chassis can be turned over. Wide bases give space for tools and parts, and height from the work surface allows space for hands.	$60 per set
	Rolls Horn - A013a Cast bronze; drilled and tapped for side or rear mount. Polished	$27 each
	Rolls Horn - A013b Cast bronze; drilled and tapped for side or rear mount. Matte Finished	$22 each
	Rolls Horn - A013c Cast bronze; drilled and tapped for side or rear mount. Chromed	$37 each
	Gurney Nutting Door Handle, Interior, Style A - R001a Small fluted and curved design to go with art-deco window crank. Also seen on the Thrupp and Maberly "torpedo".	$30 per pair
	Gurney Nutting Door Handle, Interior, Style B - R001b Large fluted straight handle to go with art-deco window crank as used on the Sedanca.	$30 per pair
	Gurney Nutting Window Crank - R001c Art-deco, fluted design with square knobs as seen on many interiors, including the Sedanca.	$30 per pair
	Curved Window Crank - R001d Smooth, curved window cranks can be used with Gurney Nutting Door Handle Style A. Perfect for the "torpedo".	$30 per pair
	Rolls Assembled Wipers - R002 Assembled chrome-plated includes rubber blades, bezels and plated nuts.	$40 per pair
	Spirit of Ecstasy "Flying Lady" Radiator Cap - R003 Sterling silver	$30 each
	Spirit of Ecstasy "Flying Lady" Radiator Cap - R003n Bronze casting - chrome plated	$20 each
	Rolls Shock Absorber Arms - R005 Correct "I" beam cross-section and end-to-end taper. Direct replacement of flat sheetmetal kit piece #72012. Cast bronze.	$22 per pair
	Rolls Carburetor - R006 Replacement carburetor for Rolls-Royce; cast bronze, plated, direct replacement for plastic kit piece but is correct size and details. Shown installed on Pocher engine.	$45 each
	Rolls Carburetor (Resin) - R006r Same as our successful brass casting. Resin is easier to drill and add more detail, lighter, and cheaper! Now, in separate parts.	$30 each
	Rolls Rear-View Mirror - B007 Chrome plated bronze; direct replacement for #75627; uses kit-supplied Mylar.	$16 each
	Rolls Oil-Filler Spout - R008 Plated bronze; correct size and curvature (in two dimensions!); direct replacement for #72599	$16 each
	Real Leather - Z005l Selected from the finest cabretta hides, our leathers are soft, flexible, thin and good smelling. Select color from drop down window. Other colors may be available — call or email for custom colors.	$50 per hide
	Piping for Leather - Z005a Select color from drop down window. Most are made from real Leather.	$8 per kit
	Rolls Ignition Loom Elbow - R009 Cast in resin; the spark plug wires coming from the distributor are gathered into this elbow and redirected 90 degrees to the sparkplug loom itself.	$5 each
	Rolls-Royce Wheel Spanner - R010 A must for any Pocher Rolls-Royce. The center screw mechanism works and the wrench fits the Pocher wheel hubs, mounts on the frame next to the engine.	$30 each
	Rolls-Royce Lucas Oil Can - R011 "Lucas" oil can - beautifully polished in sold brass. Every 1930's Rolls came with one...sets on the engine shelf.	$15 each
	Rolls-Royce Lighting Kit - R028 For wiring the headlights, taillights and marker lamps. (Includes light bulbs, wire, switch, battery box and instructions) Click here for Instructions	$40 per kit
	Rolls Boot "Rear Trunk Latch" - R012 Correctly proportioned, accurately sized, and made from cast bronze and chrome plated.	$17 per pair
	Rolls Axle and Brake Levers - R013 Axle and brake levers (pre-drill and threaded) cast in bronze.	$65 per set
	Rolls Brake Lever - R014 Brake levers, cast bronze and threaded.	$15 per pair
	Rolls i.d. Plates - R015 Our original plates, metal backing with adhesive, includes 30 1.0 mm brass rivets	$25 per set
	Rolls Instrument Faces - R015i Printed on photo paper...with duplicates	$7.50 per set
	1932 Road Map of England - Z015 1:8 scale	$10 each
	Rolls Resin Seats - R016 Cast Resin replacement seats fit directly into the kit-supplied seat frames. two front and the back seat. Click here for Instructions	$55 per set
	Rolls Fenders - R017 Resin replacement fenders for the RR Sedanca, cast from the Ambassador fenders.	$165 per pair
	Rolls Fishtail Exhaust Pipe - R018 A direct replacement to the Pocher, cast in resin.	$15 each
	Rolls Brake and Shift Levers - R019 Replaces the Pocher supplied stamped-metal parts. Chrome-plated bronze.	$75 per set
	Rolls Landau Bars - R021 A direct replacement for the Pocher supplied stamped-metal bars. Chrome-plated bronze, comes with separate pivot caps.	$60 per pair
	Rolls Hand Crank - R022 Replaces the Pocher hand crank. Drilled and threaded for the 2.0 mm Pocher shaft. Nickel plated	$17 each
	Rolls Driving Light - R023 Has a special mount that allows clearance for the shaft of the engine hand crank. Includes conduit for wire and 00-90 mounting bolts. Chrome plated Click here for Instructions	$30 each
	"Bullet" Running/Marker Lighst - R024 A direct replacement for the lights supplied with the Pocher RR Torpedo, can be used on the Sedanca and Ambassador. 2mm screw mount, includes "hollow screws" that allow wiring. Chrome plated.	$25 per pair
	Rolls-Royce Driver's Spotlight - R025 Replaces the Pocher supplied spotlight in the Sedanca (K-72) kit. Chrome-plated bronze comes with mounting screws, conduit for the wire and a lens.	$35 each
	Rolls-Royce Bonnet (Hood) Latches - R026 Bronze castings are a direct replacement for the Pocher supplied thumbscrews. Nickel plated	$45 set of 4
	Rolls-Royce Fuel Filter - R027 Just the thing to spark up those RR firewalls. Resin casting.	$12 each

Click here for the complete Model Motorcars Parts List in printable format.

Click here to download the free Adobe Acrobat Reader.

Other items may be available — call to confirm.
Items marked “custom order only” may require an extended lead time.

Domestic shipping and handling is $9.00 for Priority Mail, overseas shipping and handling is $20.00 for Priority Mail International. However, we will issued a refund of up to $5.00 if we can use a small Priority Mail International box.Prices are in U.S. funds.